User's Manual

39
Sabine 2.4 GHz Smart Spectrum Wireless (BETA)
B3-SWM7000-OpGuide.pmd - 021022 - hto
Multiple Systems Operation
• Adjustable high and low cut filters. High Cut Filter, user-control-
lable between 3 KHz and 20 KHz; 12dB/octave roll-off
• Additional compressor controls. Aside from adjustments for
ratio, threshold, and attack (which duplicate front panel controls),
the Remote Software provides control of compressor release time
and knee. The effect of compression on the output signal as a
function of input signal strength and parameter settings is displayed
in Sabine’s unique dynamic ColorComp graph, in addition to the
traditional opposing-meter indicators.
• RF Scan and Report, which measures strength for each of the 70
transmission channels, and displays a hierarchical ordering of the
clearest, strongest channels to use during system setup and op-
eration. You can print a copy of the scan results.
• Additional memory options. In addition to saving presets in re-
ceiver memory, channel configuration settings can be saved to and
recalled from disc or hard drive. All parameter settings made with
the remote control, including adjustments that are not accessible
from front panel controls (e.g., compressor knee and release), are
saved with presets. All software settings stored for each of the 15
presets, including settings not accessible from the front panel, will
be loaded whether presets are recalled by remote control or from
the front panel. Note that all settings made in Off-line/Edit mode
can be saved and applied in online operation..
• Ability to print a report of all parameter settings, creating hard
copy documentation.
• A receiver channel output mute button.
• The ability to custom name each RF channel and receiver. This
name will be displayed in both software operation, and on the re-
ceiver front panel.
• Display of important transmitter status information. In addi-
tion to duplicating the battery charge status, battery warning mes-
sage, and transmitter on/off/mute status from the front panel dis-
play, the Remote Software displays the type of battery in use, the
number of hours the battery has been in use, the frequency mid-
point (in GHz) of the transmission channel chosen, the transmitter
pad and low cut filter settings, and a warning indication in the case
of low RF signal strength. For handheld transmitters, the software
display also shows the type of mic capsule in use.
• Improved and expanded operational displays. In addition to
organizing all front panel displays on a single computer screen, the
Remote Software also displays the exact frequency, width, and
depth of FBX filters. The frequency response curve resulting from
combined filter settings (including FBX, parametric, and high and
low cut) is graphically displayed in the software. Frequency re-
sponse changes imposed by choosing various microphone models
are also shown.
• Customizable front panel lock settings. Software control allows
you to program selective access to front panel controls to be made
available once the Remote Control is disconnected. Customizable
front panel lock settings are saved and recalled as part of each
receiver’s settings. All software-only accessible settings are saved
with presets. Careful programming enables some powerful opera-
tional features — for example, locking Program Save but enabling
other front panel controls (including Program Load) will let front