SmartMike Silver S620 User Manual
Please download the SmartMike+ app SmartMike+ for ios SmartMike+ for Android For the latest information, please visit: www.sabinetek.
Contents List SmartMike Silver S620 User Manual SmartMike Silver × 1 Charging Cable × 1 Instruction manual × 1 2 Windshield × 1
Device Instructions 1.Turn on Press and hold the power button for 3 seconds till the blue indicator light flashes rapidly Power button 2.Turn off Press and hold the power button for 3 seconds till the indicator light is off An external microphone can be attached to the 3.5mm audio jack for dual microphone input Indicator light USB charging port 3.
Charging the device 1.Please connect the device with the attached Micro-USB cable 2. When the device is connected, the indicator light will glow red to indicate charging; when the charging completes, the indicator light will turn green.
Connecting via Bluetooth 1.Initial pairing a)Keep the phone within one meter from the SmartMike Silver b) Press and hold the power button for 3 seconds to turn it on till the blue indicator light flashes quickly to indicate that it is ready for pairing c)Enable the Bluetooth function of your phone and find “SmartMike Silver” from the Bluetooth device list, then tap it to set up Bluetooth pairing d)SmartMike Silver indicator light will flash slowly in blue to indicate that Bluetooth pairing is successful 2.
Quick Start Manual Before audio and video recording Device connection: connect SmartMike Silver to the mobile Bluetooth phone via Bluetooth Monitoring adjustment: Listen with headphones, monitor Bluetooth and adjust gain levels and other settings via the app MY DEVICES SmartMike Silver Connected Noise reduction adjustment: appropriate level of noise reduction can be selected based on different scenarios Input adjustment: adjust microphone gain in the app Video parameter adjustment: the resolution and aspect
Quick Start Manual Microphone toggle: select the built-in microphone of the device or an external microphone for input (such as the built-in microphone of the earphone). Select both at the same time to conduct stereo recording.
Quick Start Manual Start recording: After adjusting the appropriate audio/video and interface parameters, users can click record or shoot button to start recording, or click the power button of SmartMike Silver device onceto start audio/video recording or During recording: Microphone gain, monitoring, noise reduction level, and music volume can be adjusted in real time.
Product Application Scenarios 1 Vlog shooting: please operate according to the manual and please note to set proper parameters for audio and video settings: select microphone, positions and space between recording sound source and pickup microphone, as well as noise reduction level, etc Bluetooth Bluetooth MY DEVICES SmartMike Silver Connected 9
Product Application Scenarios 2 Podcast creation: please operate according to the manual and adjust the gain, background track and noise reduction, etc.
Product Application Scenarios 3 Mic gain + 0 Interview: please operate according to the manual. Enable mic input for SmartMike Silver within the microphone selection to pick up voice of the interviewee and enable the phone mic input to pick up voices of interviewer. AI-powered voice subtitle transcriptions can be added after recording.
Precautions 1. Do not disassemble the device 2. Do not overheat the device, including exposure to the sun for a long time, close to fire, or similar environments 3.The battery cannot be replaced by yourself. If it is necessary to replace it, please contact professional maintenance personnel 4.Do not modify the device, connect antennas, or use other transmitting antennas 5. Please clean the device with a soft dry cloth 6.Do not put it in water or other liquids 7.
FCC Warning Message NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.
FCC Warning Message -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
塞宾智麦 SmartMike Silver S620使用说明书
请下载SmartMike+ APP SmartMike+ for ios SmartMike+ for 安卓 最新资料请登录：www.sabinetek.
包装清单 塞宾智麦 SmartMike Silver S620使用说明书 SmartMike Silver × 1 数据线 × 1 说明书 × 1 2 防风罩 × 1
设备说明 1.开机 长按电源键3秒指示灯蓝色快速闪烁 电源键 2.关机 指示灯 长按电源键3秒指示灯灭 产品使用中，将外置MIC (选配)插入 USB充电口 3.5mm接口 3.
设备充电 1.请使用随机附带的Micro-USB连接线连接本设备和插线板 2.
使用蓝牙连接本设备 1.初次配对 a)将手机放在距离SmartMike Silver 1米范围内 蓝牙 b)在SmartMike Silver关机情况下，长按电源键三秒开机， 指示灯蓝色快速闪烁， 蓝牙 则进入待配对状态 c)打开带有蓝牙功能的手机，同时在蓝牙设备列表中查找"SmartMike Silver", 点击即可建立蓝牙配对连接 d)配对完成后，SmartMike Silver指示灯蓝色慢速闪烁 2.
产品快速入门 音视频录制前： 设备连接：SmartMike Silver通过蓝牙与手机连接 监听调节：佩戴上耳机，在APP内可以调节监听的等级 降噪调节：可以根据环境情况选择合适的降噪等级 输入调节：可在app内调节麦克风增益 设备 视频参数调节：可以调节视频的分辨率、屏幕尺寸等 Mic增益 监听 降噪 0 1 2 3 蓝牙 蓝牙 + 0 Mic - SmartMike Silver 视频分辨率 540p 720p 1080p 视频比例 外接Mic 6 已连接 1:1 4:3 16:9
产品快速入门 麦克风选择：选择设备自带的麦克风，或者选择外接麦克风（例如耳机内置麦克风），或者同时选用进行 立体声录制， 录制中调节好麦克风与音源的距离 外置麦克风 Mic增益 + 0 - Mic 外接Mic 内置麦克风 伴奏音乐导入：开启混音功能，打开手机其他音乐软件，切换回SmartMike+ App, 可以实现音乐实时伴奏 音乐 打开其他音乐App 切换回SmartMike+ App 7 混音
产品快速入门 开启录制 ： 调试好音视频与界面的参数后，可以点击录音或录像按钮开启录制， 或者短按SmartMike Silver设备电源键，遥控音视频录制的开启 或 录制中： 可以实时调节麦克风增益、监听、降噪等级、音乐音量等 音乐 监听 降噪 录制结束： 点击录音或录像按钮，或者短按SmartMike Silver设备电源键，结束录制 8 0 1 2 3 Mic增益 + 0 -
产品应用场景 1 Vlog拍摄：依照快速入门进行操作，并注意设置音视频参数、麦克风选择、录制音源与拾音麦克风的 位置及距离、降噪等级等 蓝牙 蓝牙 设备 SmartMike Silver 已连接 9
产品应用场景 2 播客创作：依照快速入门进行操作，可以进行增益、背景音乐、降噪的调节 蓝牙 音乐 APP 蓝牙 SmartMike+ APP + 设备 SmartMike Silver 已连接 - 音乐 监听 降噪 0 1 2 3 混音 Mic增益 10 + 0 -
产品应用场景 3 Mic增益 + 0 采访：依照快速入门进行操作，使用SmartMike Silver拾取受访者的声音，在SmartMike+ app里 开启手机麦克风拾取采访者的声音。录制完成后，可以进行语音识别字幕生成 - Mic 外接Mic 手机Mic SmartMike Silver Hello,I’m SmartMike Silver 手机麦克风 00:01 00:05 cc AI语音识别 11
注意事项 1.请勿自行拆开机壳 2.请勿将整机过度受热，如长时间暴露在阳光下照射，靠近火源，或类似的环境中 3.电池不可自行更换，如需更换，请联系专业维修人员 4.请勿自行改装本设备，不得独自外接天线或改用其他发射天线 5.请使用柔软的干布清洁本设备 6.请勿置于水中 7.因违反使用规则而遭成的直接或间接损失，不在质保范畴之内 8.请勿吞食 9.如您有任何关于本设备的疑问或问题，而本手册中未能涵盖，请与我们取得联系 www.sabinetek.
