SDS

Page 5 of 13
Safety Data Sheet
acc. to OSHA HCS (29 CFR 1910.1200)
Printing date 01/22/2015 Reviewed on 01/22/2015
Trade name: Li-MnO2 Button Cell
(Contd. of page 4)
40.0.6
·
Further information about storage conditions:
Store in dry conditions.
Protect from humidity and water.
·
Specific end use(s)
No further relevant information available.
8 Exposure controls/personal protection
·
Additional information about design of technical systems:
No further data; see item 7.
·
Control parameters
·
Components with limit values that require monitoring at the workplace:
1313-13-9 manganese dioxide
PEL (USA) Ceiling limit value: 5 mg/m³
as Mn
REL (USA) Short-term value: 3 mg/m³
Long-term value: 1 mg/m³
as Mn
TLV (USA) Long-term value: 0.02* 0.1* mg/m³
as Mn; *respirable **inhalable fraction
EL (Canada) Long-term value: 0.2 mg/m³
as Mn; R
LMPE (Mexico) Long-term value: 0.2 mg/m³
como Mn
7782-42-5 Graphite
PEL (USA) Long-term value: 15 mppcf* mg/m³
*impinger samples counted by light field techn.
REL (USA) Long-term value: 2.5* mg/m³
*respirable dust
TLV (USA) Long-term value: 2* mg/m³
all forms except graphite fibers;*resp. fraction
EL (Canada) Long-term value: 2 mg/m³
respirable
EV (Canada) Long-term value: 2 mg/m³
respirable
LMPE (Mexico) Long-term value: 2* mg/m³
*fracción respirable
110-71-4 1,2-dimethoxyethane
EV (Canada) Long-term value: 18 mg/m³, 5 ppm
Skin
·
Additional information:
The lists that were valid during the creation were used as basis.
(Contd. on page 6)