SDS

Page 6 of 13
Safety Data Sheet
acc. to OSHA HCS (29 CFR 1910.1200)
Printing date 01/22/2015 Reviewed on 01/22/2015
Trade name: Li-MnO2 Button Cell
(Contd. of page 5)
40.0.6
·
Exposure controls
·
Personal protective equipment:
·
General protective and hygienic measures:
Information is only applicable to product contents, and not to product as normally supplied. This
information is applicable to damaged, leaking, or spilled product as contact with contents is possible under
these conditions.
The usual precautionary measures for handling chemicals should be followed.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
Avoid contact with the eyes and skin.
·
Engineering controls:
No further relevant information available.
·
Breathing equipment:
Not required under normal conditions of use.
For spills, respiratory protection may be advisable.
·
Protection of hands:
Not required under normal conditions of use.
Wear protective gloves to handle contents of damaged or leaking units.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
·
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to be
checked prior to the application.
·
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to
be observed.
·
Eye protection:
Safety glasses
·
Body protection:
Not required under normal conditions of use.
Protection may be required for spills.
·
Limitation and supervision of exposure into the environment
Avoid release to the environment.
9 Physical and chemical properties
·
Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form:
Impermeable container containing liquid and solid contents plus
inert carrier materials.
Color:
Silver grey
(Contd. on page 7)