USB-DSC9 USB 3.
.5” HDD IDE USB-DSC9 / User Manual 1-Connect the short 2.5” IDE connector from the Sabrent adapter to the pins on your 2.5” Hard Drive.
USB-DSC9 / User Manual Please Note: When you remove a hard drive from an existing laptop, you may need to first remove the outer cage and sometimes an additional converter that is covering the IDE or SATA connectors.
USB-DSC9 / User Manual 2-Connect the USB cable from the Hard Drive Adapter to an available USB port on your computer.
USB-DSC9 / User Manual 3-In most cases, the USB cable will supply sufficient power for the drive to spin up and initiate. Some larger capacity Hard Drives may require more power than USB to provide sufficient power to initiate.
USB-DSC9 / User Manual 5
3.
USB-DSC9 / User Manual 2-Connect the long 3.
2.5”/3.
USB-DSC9 / User Manual 2-Connect the SATA data cable into the Sabrent Converter, and then connect the other end directly into the SATA drive 3-Connect the USB cable from the Sabrent converter to an available USB port on your computer 9
USB-DSC9 / User Manual The Hard Drive should now spin/vibrate, indicating that the Hard Drive is powering up. If the Hard Drive does not spin, it may indicate that the hard drive itself is no longer working. Quite often, older laptops or desktops that have failed may also have a malfunctioning hard drive. HDD Enclosures can only access working drives. A Drive letter should appear in MY COMPUTER, indicating that the Hard Drive has mounted and the data is accessible. 1.
