User Manual





Ensure the latching pins are fully engaged with

the locating holes in the tripod. Failure to attach correctly

could result in damage to the equipment

The tripod is delivered with the Hinge Lock in the OFF

position for use with a spreader.



 Hold the spreader between thumb



release buttons on each side.



 

 Extend the inner arm to the required length and release the

button.

 Align the latching pins with the locating

holes on the tripod leg.

 Release the buttons to lock the

spreader in place.



NOTE! The inner arm should not be pushed back against

the ratchet mechanism, always hold the release button

down whilst extending or retracting the inner arm.



helps to visually set the length of the spreader arms.

If the spreader will not go into the selected position, check



