Manualshelf

18 S2 Fluid Heads User Guide

ManualsBrandsSachtler ManualsProfessional VideoVideo 18 S2 Fluid Head & ENG 2 CF Tripod System with Mid-Level Spreader
12345678910
7
Installation
Touch Bubble
The uid head is tted with an illuminating touch bubble which
allows easy levelling in poor lighting conditions. The illumination is
activated by tapping the bubble and will automatically switch off after
approximately 20 seconds.
Levelling the Head
1. Apply the horizontal and vertical brakes and hold the head rmly
with one hand.
Mounting the Head
The uid head is designed to be installed onto standard tripods
using the tie down with the 100 mm ball base. The uid head can be
mounted to a slider or pedestal using a FB converter (# 3913).