User Manual
6
How to use Bluetooth
1. Long press the power on/o button for 10 sec. After the rst 5 sec., you will hear the ”ON” sound.
Keep pressing the button for another 5 sec. to turn on pairing mode, indicated by ashing the
power indicator red and blue.
2. Go to the Bluetooth settings on your device and make sure Bluetooth is turned on.
3. Look for “SACKit Touch 400” in the list of bluetooth devices.
4. When it appears, tap the name to pair. The speaker emmits a conrmation voice saying: ”Connec-
ted” as soon as it is paired.
5. Your device is now connected to SACKit Touch 400 and you can enjoy your music.
6. The music can be paused / played by pressing the Power button.
7. SACKit 400 will automatically pair with the last connected device.
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecting opportunities won’t appear on the new device.
THE DEVICE
Operaon instrucons for use aer rst pairing.
1. After rst pairing your SACKit Touch 400 and your bluetooth device will be conncted automatically
2. Bluetooth device will automatically reconnect, the LED light will blink blue once SACKit Touch 400
is succesfully paired.
3. Turn the headphones on by holding down the ”X button” until you hea the ”ON” sound.
4. Long press ”on/o” to turn o SACKit Touch 400.
How to use the Acve Noise Cancellaon funcon
1. Push the ANC button on the left ear cup turning on the green LED light and you can enjoy the
headphones in Active Noise Cancellation mode
2. When you don’t need the Active Noise Cancellation function, turn the ANC function of by pus-
hing the ANC button.
3. Active Noice Cancellation can be activated and deactivated even when the SACKit Touch 300
Headphone is turned o. The Active Noise Cancellation will also remain on even when you turn
the SACKTouch 300 Headphone o.
Operaon instrucons for in-line use
Use the 3.5mm audio cable when you do not wish to use Bluetooth connection. In-line use is also pos-
sible
when the headset is turned o.
For in-line use:
Use the 3.5mm audio cable when you do not wish to use Bluetooth connection. In-line use is also pos-
sible when the headset is turned o.
Battery information
• Battery: rechargeable Polymer Lithium-Ion Battery, 500 mAh.
• Power: 5V DC 1A via USB-C. Please use the USB cable sealed with our headphone for charging
• Charging Time: Please be sure the battery has been fully charged before rst use. It can take up to
3 hours of charging the rst time, but 2 hours normally with a 5V 1A adapter.
• NOTE: If the pairing is not succesfull, please turn the headphones oof and back on and retry pairing.