Coffeemaker - Coffee System User Manual

12
PROGRAMMING
START
The following programming features can be changed to suit your needs.
Press the small coffee button and the hot water button, and
simultaneously, turn the machine on.
WATER
HARDNESS
RINSING
The hardness of tap, bottled and filtered water may vary
depending on the region, brand and filter used. For this
reason, the appliance can be set according to the water
hardness to be used, expressed on a scale of 1 to 4
(1 = soft and 4 = hard).
Turn the machine off.
When this function is enabled, the internal machine circuits
will be rinsed immediately after the warming-up phase to
ensure that coffee is prepared with fresh water only.
Rinsing activated (ON).Press the button to set the
function.
In all new appliances this function has already been
activated at the factory.
Rinsing deactivated (OFF).
Procedure for accessing the programming mode.
The appliance is factory set on a hardness value of 3*. The
setting should be adjusted according to the level of water
hardness to be used with the machine.
Dip the strip in water for 1
second.
Check how many squares
change color.
The degree of hardness
will be signaled by the
indicator lights.
Press the button.
Hardness 4
Hardness 3*
Hardness 2
Hardness 1
and
PROGRAMMING MACHINE FUNCTIONS