Service manual

ROYAL 9. DISASSEMBLY

Saeco International Group REV.4 SEPT.2003 Seite 7/20

5. Disassembling the grinder

a) Turn the grinding adjustment ring (1) counter clockwise until the three lugs of

the grinding disc fitting (2) are clearly visible and remove the upper grinding

disc from the grinder. Using a vacuum cleaner remove the ground coffee.

Fig. 11

b) Remove the fixing screw (1) of the grinding cone (note: left thread).

c) Carefully remove the grinding cone (2) (take care of balls and springs of

friction clutch).

Fig. 12