Service manual

3. OPERATION INCANTO
Page 14/16 REV.5 FEB.2005 Saeco International Group
4. Operation (Incanto Easy)
4.1. Control panel
4.2. Operating instructions (quick reference)
Action Comments
Coffee
LED
Steam
LED
Getting started
1 Unpack machine Check for damage
2 Install Aqua Prima filter
3 Fill water tank Wait for 30 min.
4 Fill coffee beans container
5 Connect mains plug
6 Turn on main switch Light
flashes
7
De-aerate water circuit Open hot water pressure valve
until water flows.
Light
flashes
Heating stage (approx. 45 sec.) Light
flashes
Ready ON
Reset filter counter
8 Press steam button Filter LED flashes briefly
Making coffee
9 Pre-select cup fill volume with setting
button.
Depending on cup size ON
10 Place cup under dispenser.
11
Press start button (coffee button) Coffee button Light
flashes
Coffee dispensing / Powder coffee
12 No powder dispensed
Dispensing steam
13 Press steam button Heating stage Light
flashes
14
Ready ON
15 Steam dispensing
Open HWS valve
To heat beverages/to froth milk ON
16
Press steam button / deactivate steam
function.
Cool by de-aerating
(until coffee button lights up)
Light
flashes
Light
flashes
Ready (to make coffee) ON
Hot water dispensing
17
Open HWS valve Immediate ON
Coffee
Steam
Alarm - LED
Filter-Led
Fill quantity control
8
5
1