Service manual

INCANTO S-CLASS 6. FAULTS
Saeco International Group REV.5 FEB.2005 Page 3/3
Part Fault Cause
Turbine calcified / other
deposits
Hall sensor defective
Turbine
Varying coffee quantity
Indicator signals need for de-
aerating with water tank
sufficiently full.
Connections oxidised
Float not watertight
Float jammed
Magnet in float too weak
Float
Water low indicator lights up
(although water tank is not empty)
Electronic system defective
ATTENTION: A defective temperature sensor (KTY) may be responsible for
an unexplained functioning mode.