Service manual

INCANTO S-CLASS 3. OPERATION
Saeco International Group REV.1 FEB.2005 Page 5/21
2.2. Operating instructions (quick reference)
Action Comments
Powder
button
LED
Expresso
LED
Coffee
LED
Hot water
LED
Getting started
1
Unpack machine. Check for damage.
2 Fill water tank
3 Install Aqua Prima filter. Wait for 30 min.
4
Fill coffee beans
container.
5 Connect mains plug.
6 Turn on main switch. Light
flashes
Light
flashes
7 De-aerate water circuit. Press hot water
button
Open hot water
pressure valve until
water flows.
Light
flashes
Light
flashes
Light on
Heating stage
(approx. 1.5 min).
Light
flashes
Light
flashes
Ready ON ON
Reset filter counter
8 Press hot water button
(about 6 sec.)
Filter LED flashes
briefly.
ON ON
Making coffee
9
Programme coffee
quantity for each selection
button.
• Coffee
• Expresso
Depending on cup
size.
Programme by
keeping the coffee
selection button
pressed until the
desired quantity is
reached.
Light
flashes
For
expresso
program
ming
Light
flashes
For
coffee
program
ming
Press once = 1 cup of
coffee
Light
flashes
(flashes)
10
Press start button (coffee
button).
Press twice = 2 cups
of coffee.
Light
flashes
2 x
interval
(flashes)
2 x
interval
Coffee dispensing / Powder coffee
11
Place cup under
dispenser.
Place powder coffee
in powder container
(1 measuring
spoonful)
12 Select powder button and
relevant coffee button:
Expresso / Coffee
Only one coffee can
be dispensed at a
time.
ON Light
flashes
(flashes)
Dispensing steam
13 Open HWS valve Immediately ready ON ON