Operating instructions

11
A
STANDBY MODE
Themachineisdesignedforenergysaving.After60minutesofinactivity,themachinegoesintostand-bymode,theboilerisnolonger
heatedandallthedevicesturno.
Powerconsumptionisreducedtoaminimum.Pressanybuttontoturnthemachineonagain.
Themachinestatuscanbemanuallychangedtostand-bymodebyholdingthestand-bybuttonpressedfor3seconds.
Note:
1 The stand-by mode cannot be activated if the service door is left open.
2 The stand-by activation time can be changed in the "MACHINE MENU" on
page 26.
3 When the stand-by mode is activated, the machine performs a rinse
cycle of the internal circuits, if necessary. The cycle can be interrupted by
pressing the "STOP" button.
Themachinecanbeturnedonagainbyexecutingoneofthefollowingactions:
1 By pressing any of the control panel buttons.
2 Byopeningtheservicedoor(whenclosingthedoorthemachinegoesbackto
stand-bymode).
Theredlightasheswhenthemachine
isinstand-bymode.