User manual

ENGLISH

WATER

HARDNESS

ENABLE FILTER

ACTIVATE FILTER

Replacing the “INTENZA+” Water Filter

When the “INTENZA+” water  lter needs to be replaced with a new one, the

following icon is displayed.

Replace the  lter as described in the previous chapter.

The machine is now programmed to manage a new  lter.

Note:

If the  lter is already installed and you want to remove, but not replace it,

select the “ENABLE FILTER” option and set it on OFF.

If there is no “INTENZA+” water  lter installed, insert the small white  lter

previously removed into the water tank.

The machine starts dispensing water. This screen will be displayed.

ACTIVATE FILTER

PLACE A CONTAINER

UNDER THE

WATER SPOUT

Press “ ” to con rm.

When the machine stops dispensing, remove and empty the container.

Now the machine is ready to brew.

In this way the machine has been programmed to inform the user of

the need to replace the “INTENZA+” water  lter.