Installation guide

Hard Disk Drive Installation

is to insert the hard drive sleeve

th the key a

The first step in installing the hard drive

into the machine. The hard disk drive default setting is initially set to master. The

second step is to insert the key provided and turn the tray key to the lock

position. If this process is ignored the hard disk drive will not be detected. Follow

the previous steps for the second hard drive or second empty sleeve.

 Please Note: If the Hard Disk Drive is not locked in wi

system loading screen will keep flashing and the DVR will not go

into record mode. This is because the Hard Drive is not being

recognized.

Final Install Process

he basic wiring installation and the hard disk

Figure Shows 2.5“ HDD

Once you have completed t

drive installation you are read to turn on the DVR. Simply plug the power source

you installed earlier. The POWER LED lights will light up if power is normal.

The next step is to set up the menu options for the DVR.