Service manual

SYNTIA CAPPUCCINO 02 TECHNICAL SPECIFICATIONS
Saeco International Group Page / 03
2.2. Appliance parameters and performance
02
Descaling frequency
Hardness Water hardness Withoutanti-scalelter Withanti-scalelter
1 Soft (up to 7°dH) 240 litres (480,000 pulses) 480 litres (960,000 pulses)
2 Medium (7° - 14°dH) 120 litres (240,000 pulses) 240 litres (480,000 pulses)
3 Hard (15° - 21°dH) 60 litres (120,000 pulses) 120 litres (240,000 pulses)
4 Very hard (over 21°dH) 30 litres (60,000 pulses) 60 litres (120,000 pulses)
The default water hardness level is 3. Each litre of water corresponds to approximately 2,000
pulses.
PRODUCT
QUANTITY
Minimum
quantity
(Puls.)
Default
quantity
(Puls.)
Maximum
quantity
(Puls.)
Set
by the
user
Set by the
Production/Service Dept
Expresso 70 165 600 Yes No
Average coffee No No No No No
Expresso lungo 70 440 600 Yes No
Pre-ground Yes
Hot water Continues until the water is used up (capacitive sensor)
Steam Continues until the water is used up (capacitive sensor)
RINSE Initial rinse Final rinse
When performed When the appliance is switched
on and the boiler temperature is
≤ 50°C
When the machine is switched
off electronically, manually or
automatically after 60', if at least
one coffee has been dispensed
before being switched off
No. of Pulses 180 80
Stop option Yes, by pressing any button Yes, by pressing any button
Can be disabled by the user No No
Can be disabled by the
Production/Service Dept
No No
No. of pulses adjustable by
the user
No No
No. of pulses adjustable by
the Production/Service Dept
No No
Pulse range
(Min - Max)
No No
WATER HARDNESS ADJUSTABLE