Service manual

SYNTIA CAPPUCCINO 07 DISASSEMBLY

Saeco International Group Page / 09

Disassembly of the upper cover

1) Remove the dreg drawer,

water tank, coffee container

cover, water drip tray, brewing

unit, control knob cover and

the cappuccino button (use a

screwdriver as a lever).

2) Loosen the screws shown

and remove the nger protection

mushroom and the coffee

container.

3) Loosen the screws shown from

inside the compartments that

contain the water tank and dreg

drawer.

4) Move the upper cover

outwards to facilitate the removal

of the front panel.

5) Lift the upper cover and

disconnect the earth wire shown.

7.1. Outer elements

When assembling the appliance cover, be careful not to

scratch the keyboard cover.

It is recommended to place a sheet of paper on the

keyboard cover (see picture) before repositioning the

appliance cover and remove it when assembly is complete.