Service manual

SYNTIA CAPPUCCINO 07 DISASSEMBLY
Saeco International Group Page / 09
Use a suitable pair of pliers to remove the
clamp (as shown).
Tighten the clamp as shown in the
pictures.
7.13. Un/installing Oetiker clamps
1
2
1) Boiler connection
2) Other connections
3
A
4
3) To remove the lower grinder blade, block the
increment pin (A) in place and turn the grinder
blade anti-clockwise until it is released from the
bayonet coupling.
4) When retting the upper grinder blade
support, make sure it is placed as shown in the
picture, with the highlighted mark in the same
position.
09