Service manual

9/11
TALEA Section 07
REV00 - August 06
To remove the upper grinder support, use a wrench, turning it clockwise to release the
grinder support from the bayonet coupling.
On the lower grinder, keep the increment pin
as indicated locked in position and proceed as
shown in the figure above.
When refitting the upper grinder sup-
port, take care to reposition the mark as
shown in the picture.
To remove the grinder, rotate anti-
clockwise until it detaches from the
bayonet coupling.
7.9 Coffee grinder setting, assembly and disassembly