User's Manual
SAFFreeMile5.8GHzFODUUserGuide•Rev.1.0•Softwareversion6.77
©SAFTehnikaJSC2011
12of48
Figure6–FreeMile5.8GHzMIMOfrontpanel
AccessingtheFreeMile5.8GHzMIMOUnit’sWeb
Management
InordertoaccesstheFreeMile5.8GHzMIMOunitandtoperforminitialconfigurationyouwillneedalaptop
withLANcard,2Category5eEthernetcablesandaPoweroverEthernetinjector.
• Your connected laptop should be in the same subnet with manageable SAF FreeMile, so you can
“see”
them;thatiswhy,thelaptopEthernetportsettingsshouldbesetasfollows:(in‘MicrosoftWindows’go
to Control panel
Æ
Network Connections
Æ
Local Area Connection
Æ
Properties
Æ
Internet Protocol
(TCP/IP)
Æ
Properties):
– IPaddress192.168.2.1;
– Netmask255.255.255.0;
– everythingelseisblank.
• YoumusthavePoE(PoweroverEthernet)injectorwith48VDCpowersupplytoconnectthelaptoptothe
SAF FreeMile FODU. Power over Ethernet injector can be purchased from SAF Tehnika JSC as optional
accessory.
• ConnecttoSAFFreeMile5.8GHzMIMObyenteringIPaddressinthebrowseraddressline‐bydefaultthe
IPaddressis192.168.2.66
• Enter the default administrator login settings to access the Web management page. The default
administratorloginsettingsforFreeMile5.8GHzMIMOunitare:
Login:
admin
Password:admin01
• AftersuccessfuladministratorlogonyouwillseethemainpageoftheFreeMile5.8GHzMIMOunitWeb
managementinterface.TheFreeMile5.8GHzMIMOunitnowisreadyforconfiguration.Forfurther
instructionsonconfigurationrefertotherespectivechapterWebManagement.
PoweronLED
Ethernet+Power(RJ45)