User's Manual

SAFFreeMile5.8GHzFODUUserGuide•Rev.1.0•Softwareversion6.77
©SAFTehnikaJSC2011
16of48

Figure13–SettheEncryption

Step8. ReduceTransmitPowerbeforetestingtheunitsplacedonatable.FreeMile5.8GHzMIMOunits
placedinshortdistancewithhightransmitpowermaynotworkorevendamagethepeer's
radio’sreceiver.

Step9. Changewebmanagementloginpassword.Thisisstronglyrecommendedforsecurityreasons.
For
instructionsonchangingtheadministrator’spasswordrefertothecorrespondingsection
AdministrativeAccount.

Figure14–ChangeAdministrator'sPassword

Step10.SaveandApplytheconfiguration.

Step11. Setupthesecondunitofthelinkinthesamewayandcheckifconfiguredunitsestablisheda
Link.

VerifyFreeMile5.8GHzMIMOLinkConnection

AfterthebothunitsoftheLinkareconfigured,verifythelinkquality:

Step1. Connecttotheunit’swebmanagementinterface.

Step2. ChecktheSignalIndicatorbarlocatedatthebottomofthewebmanagementinterface: