User's Manual

INTEGRA User Manual WEB GUI
24
Over The Air
Radio à Configuration
Radio configuration page is available in “System” menu (Over The
AiràRadioàConfiguration).
1) Tx power – Available range depends on radio model and selected modulation. Actual
range will be indicated in the brackets;
2) Tx frequency – Available range depends on frequency band, subband, radio side and
channel bandwidth selected. Actual range will be indicated in the brackets.
Tx frequency range indicates range of central frequencies for configured channel
bandwidth.
Default frequency range (indicated on the label) is defined for 3.5MHz channel
bandwidth.
3) Tx mute [ >=10 sec ] – allows muting transmitter to limited time interval in seconds.
Minimum value is 10 seconds. Note that transmitter will be muted only if valid value in
seconds is entered;
4) RSSI Audio – allows disabling/enabling RSSI audio operation on 3.5mm jack beside
USB port. By default RSSI Audio is enabled;
SAF Tehnika JSC