User's Manual

INTEGRA User Manual WEB GUI
28
Ethernet à Port status and configuration
1) Port – Lists available switch ports;
2) State – shows operation status of each port;
3) Link status – shows whether link with appropriate port is established and according
link speed;
4) Link speed – shows whether link speed is configured to automatic speed setting or
manual. Note that manual setting is available only for electric Ethernet port (LAN1).
In order to adjust Ethernet port settings, press MODIFY button
1) Port – lists available switch ports;
2) State – enable or disable port;
3) Link status – shows whether link with appropriate port is established and according
link speed;
4) Link speed – allows manually adjusting link speed (available only for LAN1 port).
5) By pressing „Execute configuration” changes made to the corresponding section
apply only for the local side Integra. If „Rollback on” is selected, configuration will be
reverted in case erroneous configuration changes are applied.
network status info
Use to show status of all ports.
network status config
Use to show configuration of all ports..
network port <port> set admin-
state <enable|disable>
Use to enable or disable particular port.
SAF Tehnika JSC