User's Manual

INTEGRA User Manual WEB GUI
35
1) Default value – deselect to activate manual threshold modification;
2) When “Default value” is deselected, “Low value”, “High value” and “Delta value” fields
for all parameters become editable;
3) Set all to default – resets “Low value”, “High value” and “Delta value” for all
parameters to factory defaults;
4) By pressing „Execute configuration” changes made to the corresponding section
apply only for the local side Integra.
Performance à Performance graph
Performance graph allows visualising various parameters over chosen time period as
curves. It is possible to choose between System Uptime (s), System CPU temperature (C), Rx
level (dBm), Radio temperature (C), Radial MSE (dB), Carrier offset (Hz), Modem temperature
(C), PSU power (W) and PSU voltage (V). Any two parameters can be shown at a time. By
default Rx level (dBm) and Radial MSE (dB) are selected.
SAF Tehnika JSC