User's Manual
Table Of Contents
- Chapter 1: OVERVIEW
- Chapter 2: INSTALLATION
- Chapter 3: WEB GUI
- Initial configuration
- Over The Air
- Networking
- Performance
- System
- FW ( Firmware upgrade
- Configuration ( IP configuration
- Configuration ( SNMP configuration
- Configuration ( Configuration file
- Configuration ( System configuration
- Diagnostic ( Loopback configuration
- Diagnostic ( Download troubleshooting file
- Tools ( License management
- Tools ( Console
- About ( About System
- About ( Copyright
- Chapter 4: INTERFACES
- CONTACTS
INTEGRA User Manual WEB GUI
46
9) Background Block Error Ratio (BBER) – The ratio of BBE to total seconds;
10) Uptime – time in seconds during which link was synchronized;
11) Unavailtime – time in seconds during which link was not synchronized;
12) Clear – Clears all counters.
modem performance
Check modem statistics according to ITU-T G.826.
See detailed description above.
System
FW à Firmware upgrade
1) Shows list of available firmware files;
2) Upgrade firmware – click on preferred firmware in the list and press “Upgrade
firmware” button to initiate firmware upgrade process;
3) Reboot – Reboots management CPU;
4) Delete – Deletes selected firmware file from the list;
5) Choose File – Press to browse for a firmware file on your hard disk drive;
6) Upload – Press to upload a firmware file to Integra.
firmware info
Use to show detailed information on Integra firmware.
firmware install <version>
Use to install firmware version uploaded. Note that exact
version needs to be entered. Check available firmware
versions using command “firmware list”.
firmware list
Use to list uploaded firmware versions.
firmware remove <version>
Use to remove firmware version uploaded. Note that exact
version needs to be entered. Check available firmware
versions using command “firmware list”.
SAF Tehnika JSC