User's Manual

INTEGRA User Manual WEB GUI
49
1) Read community – specifies the SNMP v1/v2c community name of the agent to
enable parameters to be read;
2) Write community – specifies the SNMP v1/v2c community name of the agent to
enable parameters to be written;
3) Trap community – specifies the SNMP v1/v2c trap community name for trap
authentication in monitoring applications;
4) List of SNMP managers – shows the list of IP addresses of the management
terminal with the installed Trap Manager software, based on SNMP v1/v2c platform.
The Integra’s management controller sends SNMP traps to the Trap Manager with IP
address specified here. The SNMP Trap Manager is a PC with installed SNMP trap
management software
;
5) List of trap V1 managers – shows the list of IP addresses of SNMP v1 hosts; adds or
deletes the host IP address to the Integra SNMP v1 host table. If the SNMP host
connected to the Integra is not added to the SNMP v1 host table, Integra will not
respond to the SNMP requests from that host;
6) List of trap v2c managers – shows the list of IP addresses of SNMP v2c hosts; adds
or deletes the host IP address to the Integra SNMP v2c host table. If the SNMP host
connected to the Integra is not added to the SNMP v2c host table, Integra will not
respond to the SNMP requests from that host;
SAF Tehnika JSC