User's Manual

INTEGRA User Manual WEB GUI
52
system datetime <datetime>
Use to enter system time and date. Use “YYYY-MM-
DD/hh:mm:ss” syntax for date/time.
system name <name>
Use to define system name.
system location <location>
Use to define system location.
system user access
Use to show current user rights.
system password <password>
Use to define password for current user.
system uptime
Use to show system uptime since last system start.
Diagnostic à Loopback configuration
1) Modem loopback – check to activate modem loopback, during which signal is looped
back to local end after the modem and Integra should be able to synchronize to itself;
2) By pressing „Execute configuration” changes made to the corresponding section
apply only for the local side Integra.
Diagnostic à Download troubleshooting file
Downloads troubleshooting file to your hard disk drive. Note that for proper diagnostics
additionally alarm log file (“PerformanceàAlarmàAlarm logàAlarm event log file”) needs to
be downloaded.
SAF Tehnika JSC