User's Manual
Table Of Contents
- Chapter 1: OVERVIEW
- Chapter 2: INSTALLATION
- Chapter 3: WEB GUI
- Initial configuration
- Over The Air
- Networking
- Performance
- System
- FW ( Firmware upgrade
- Configuration ( IP configuration
- Configuration ( SNMP configuration
- Configuration ( Configuration file
- Configuration ( System configuration
- Diagnostic ( Loopback configuration
- Diagnostic ( Download troubleshooting file
- Tools ( License management
- Tools ( Console
- About ( About System
- About ( Copyright
- Chapter 4: INTERFACES
- CONTACTS
INTEGRA User Manual INTERFACES
59
RSSI/audio port
RSSI (Received Signal Strength Indicator) port is used to adjust the alignment of
antenna for best performance (for both rough and fine adjustment); this can be done using
digital multimeter or headphones connected to the RSSI port. RSSI port is 3.5mm socket.
The output of the RSSI port is DC voltage and audio frequency and varies depending on
received signal level. Both are linear curves.
SAF Tehnika JSC