User's Manual

The CFIP Series Full Outdoor Unit Installation Manual • Rev. 1.3 • Software version 1.42b

5.2 Attaching CFIP Full Outdoor Unit to Antenna

Figure 5. Attaching CFIP Full Outdoor Unit to Antenna

Fig. 5(1). You need only one tool to attach CFIP Lumina to the antenna.

Fig. 5(2). Check antenna polarization and match it with CFIP Lumina polarization.

Note, that antenna feed sticker must be removed before use.

Fig. 5(3). Note, that lockings should be positioned in way it is shown on picture.

Fig. 5(4). Use two guidance pins or 4 side lockings to choose preferable way of attachment. Lockings

should be tightened diagonally in sequence as shown.

Fig. 5(5, 6). Attaching tool allows tightening lockings in two different ways. Twist the tool clockwise.

Fig. 5(7). Tightened lockings should look as shown on picture.

(!) Mounting locks may differ from the ones shown in the image.