User's Manual

The CFIP Series Full Outdoor Unit Installation Manual • Rev. 1.3 • Software version 1.42b

Proprietary notice

The information presented in this guide is the property of SAF Tehnika, JSC. No part of this

document may be reproduced or transmitted without proper permission from SAF Tehnika,

JSC.

The specifications or information contained in this document are subject to change without

notice due to continuing introduction of design improvements. If there is any conflict between

this document and compliance statements, the latter will supersede this document.

SAF Tehnika, JSC has no liability for typing errors in this document or damages of any kind

that result from the use of this document.

To get up to date information about accessories and their availability, please contact sales

representative.

Note: FODU/ODU does not contain serviceable parts. Warranty will not be applicable in the

event FODU/ODU has been hermetically unsealed.

Note: SAF Tehnika JSC is not responsible for any radio or TV interference caused

by unauthorized modifications to this equipment. Such modifications could void the user's

authority to operate the equipment.

1 Introduction

This manual describes how to install SAF CFIP series microwave radio link consisting of

Full Outdoor Units (FODUs).

1.1 Revision history

Revision Date Comments

1.0 September, 2009 Document created

1.2 January, 2010 Document created

1.2 List of Abbreviations

128QAM – 128-Quadrature Amplitude Modulation

16APSK – 16-Amplitude and Phase Shift Keying

256QAM – 256-Quadrature Amplitude Modulation

32APSK – 32-Amplitude and Phase Shift Keying

64QAM – 64-Quadrature Amplitude Modulation

8PSK – 8-Phase Shift Keying

AC – Alternating Current

ACM – Adaptive Coding and Modulation

AGC – Automatic Gain Control

ASCII - American Standard Code for Information Interchange