Users Manual Part 1

Phoenix G2 IDU User Manual OVERVIEW

SAF Tehnika JSC

Figure 1.11 PhoeniX G2 1+1 SD configuration

PhoeniX G2 1+1 Full protection configuration:

 1+1 HSB, FD and SD full protection is provided. SD supports only fixed hot-

swap role – primary or secondary

 This protection type protects the link also against IDU, power supply and

interface failures

 In case of protection, when the Primary link fails, the secondary re-configures

itself to the Primary role

Figure 1.12 PhoeniX G2 1+1 full protection configuration

2.5 Gbps SFP modules must be used for both IDU FO interconnection. In Design Type 511

both SFP ports work in “Forced 2G5” mode.

PhoeniX G2 2+0/2+0 XPIC configurations:

 2+0 configuration is used to aggregate payload traffic (capacity doubling). In

this case 2 frequency channels are required

 2+0 XPIC configuration is used to aggregate payload traffic using 1 frequency

channel in both polarizations Vertical and Horizontal simultaneously