Users Manual Part 1

Phoenix G2 IDU User Manual WEB GUI

SAF Tehnika JSC

Figure 3.13 Status



General



System screen

1) Fan Function – shows the actual fan configuration status and actual spinning speed;

2) Modem Unit Temp – temperature of the modem part;

3) IF Rx Level @140 Mhz – the IF signal strength detected on thecable input of the

modem part;

4) DC Power Supply For RF – the actual status of power supply for the radio part;

5) Modem-RF Unit Communication – status of telemetry communication between the

device and radio part;

6) RF Unit Temp – temperature read from the radio part;

7) IF Tx Level @350 MHz – the IF signal strength detected on the cable input of the radio

part;

8) Device IP Addr – the IP address of this IDU;

9) Fallback IP Addr – the fallback IP address of this IDU;

10) USB IP Addr – the fallback USB IP address of this IDU;

11) Default Gateway – the default gateway IP address of this IDU;

12) SNMP daemon status – the status of the inbuilt SNMP daemon;

13) NTP server – the time synchronization server configuration.

Status  General  License

This section displays the content and status of the currently used license with available

modulation schemes and options as well as remaining license time when a time-limited license

is in use.

By pressing the button, a License Request

(licreq_SN_timestamp.afw) file will be generated and downloaded. It will be required for

extending of time-limited License. It can be downloaded from Maintenance  Files  Exports

page.