Installation Guide

PIECE QUANTITY

A 1X

B 1X

C 1X

D 1X

E 12X

F 12X

Weight Capacity: 300 lbs

G 12X

WARNING: DO NOT STAND ON CHAIR

H 1X

WARNING: DO NOT OVER TORQUE BOLTS/SCREWS

Spring washer

Allen bolt

(8x55mm)

Allen key

Leg

Seat

Flat washer

DESCRIPTION

PICTURE

Back

Leg

CARE AND MAINTENANCE

.Spot clean using a mild water-free solvent. Only a professional cleaner should

undertake a complete overall cleaning.

The use of steam or water-based cleaners may cause excessive shrinking or staining.

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this

item

* This item should be assembled on a soft surface to prevent scratching the finish during

assembly

* This item may require periodic tightening

Model# AMH4011A

Part List and Hardware List

Product Dimensions: 41"W X 21.12"D X 35.5"H

PAGE 1
CARE AND MAINTENANCE .Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a complete overall cleaning. The use of steam or water-based cleaners may cause excessive shrinking or staining.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes. Tools Required for Assembly (included): Allen key Step Attach the seat (D) and back(A) to the leg (B). Use the allen key (H) to tighten the spring washer (F), flat washer (E) and the allen bolt (G). Attach the leg (C) to the seat (D) and back (A).