Installation Guide

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key and Phillips Screw Driver
Step 1
Put the Table Top (E) upside down on the ground, attach the Legs to
the Top, use Allen key to tighten the Bolts (H)
Step 2
Attach the Bar (D) to the top, use Phillips Screw Driver to tighten the
screws (F), then connect the Bar with Legs, use Allen Key to tighten
the Bolts(G)
Step 3
Attach the Corss (C) to Legs, use Allen Key to tighten the Bolts (H)