Instructions / Assembly

CARE AND MAINTENANCE

Always use felt pads under all articles to prevent discoloration or softening of the lacquer.

Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and

avoid common hazards such as hot dishes, harsh solvents and abrasives. Cleaning

should be done with a soft lint free cotton cloth dampened with water or furniture polish.

On highly used surfaces we recommend applying a quality paste wax which should be

used on a regular basis to provide additional protection from scratches and spills. How

often you apply the wax depends on how much wear the furniture receives.

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this

item

* This item should be assembled on a soft surface to prevent scratching the finish during

assembly

* This item may require periodic tightening

Model# :

Part List and Hardware List

Product Dimensions: 33.5"Wx13.5"Dx35.6"H

PIECE DESCRIPTION PICTURE QUANTITY

A LEG 1X

B LEG 1X

C TOP 1X

D SHELF 1X

E SHELF 1X

F BACK 2X

G SCREW 12X

H ALLEN BOLT + WASHER 12X(35mm)

I ALLEN KEY 1X

J PHILLIPS SCREW DRIVER 1X

AMH6536AMH6536

PAGE 1
CARE AND MAINTENANCE Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. Tools Required for Assembly (included): ALLEN KEY AND PHILLIPS SCREW DRIVER Step 1: Step 2: Put the leg (A) on the ground, attach the Top and shelf to the leg (A), Use Allen Key to tighten all the bolts.