Instructions / Assembly

Installation

Step 1

Step 2

Step 3 Wire connection

*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.(See illustration on left)

Grounding Instructions:

*Parallel Cord(round&smooth)

*Parallel Cord(square&ridged)

Clear,Brown,Gold or Black without Tracer(colored stripes)

Clear,Brwn,Gold or Black without Tracer(colored stripes)

Insulated Wire(not green)with copper metal conductor

Insulated Wire(not green)with Silver metal conductor

Connect,Hot,Black or Red outlet Supply Wire to:

Connect,Neutral,White Outlet Supply Wire to:

Black

White

Unpack all parts from cartons carefully.

Weave the 2 wire power cord and bare ground

wire through every other loop to the top of

chain(J),center holes of Hanging

Loop(F)&Canopy(E)&Mounting Plate(B) as

diagram.

Insert the threaded tube of the Mounting Plate(B)

into the center hole of the Hangling

Loop(F),rotate the Mounting Plate(B) clockwise

till tight.

Slide the Canopy Nut(G) then the Canopy(E) to

the end of the Chain(J).

Screw the Chain(J) to the Hanging Loop(F) and

the Fixture Loop (I) with Closable link/cap (H)

as diagram.

2 / 3