Instructions / Assembly

a) For installation in the United States: Wrap ground wire from outlet box around green

ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If

fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire

around green grounding screw on mounting bracket. Tighten ground screw.

Step 4

PLEASUE USE TYPE"B" BULB MAX 40-WATT

OR CFL BULB MAX 9-WATT

THERE ARE 6PCS 25-WATT TYPE"B" BULBS

IN THE BOX.

Step 5

Consult a qualified electrician to ensure correct branch

circuit conductor

ENJOY YOUR LAMP

Attach the Mounting Plate (B) onto the junction

box by inserting two Mounting Screws (D) and

turning clockwise till tight.

Slide the Canopy (E) upward along the chain(J)

till the ceiling surface. Fix the Canopy(E) by

rotating the Canopy Nut(G)clockwise to engage it

with the threaded portion of the Hanging Loop (F)

until secure. Do not over tighten this nut.

Attach the Finial(N) onto the threaded portion of

the bottom of the lamp body and rotate it

clockwise till tight.

Place each Socket Sleeve(K) onto each socket

until secure.

Insert the bulbs(L) into the sockets until secure.

DO NOT EXCEED THE SPECIFIED WATTAGE.

3 / 3