Instructions / Assembly

Step 4 Wire connection

*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.(See illustration on left)

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green

ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If

fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire

around green grounding screw on mounting bracket. Tighten ground screw.

Step 5

PLEASUE USE TYPE"B" BULB MAX 40-WATT

OR CFL BULB MAX 9-WATT OR LED MAX 9-WATT

THERE ARE 4 X 4W LED BULBS IN THE BOX.

Step 6

Consult a qualified electrician to ensure correct branch

circuit conductor

ENJOY YOUR LAMP

Attach the Mounting Plate (B) onto the junction box by

inserting two Mounting Screws (D) and turning

clockwise till tight.

Slide the Canopy (E) upward along the chain(J) till the

ceiling surface. Fix the Canopy(E) by rotating the

Canopy Nut(G)clockwise to engage it with the threaded

portion of the Hanging Loop (F) until secure. Do not

over tighten this nut.

Insert the bulbs(C) into the sockets(M) until secure. DO

NOT EXCEED THE SPECIFIED WATTAGE.

Attach the Bottom Frame(K2) to the Top Frame(K1),

aligning the corned holes then fix it with Knurled

Nuts(N) clockwise till tight.

*Parallel Cord(round&smooth)

*Parallel Cord(square&ridged)

Clear,Brown,Gold or Black without Tracer(colored stripes)

Clear,Brwn,Gold or Black without Tracer(colored stripes)

Insulated Wire(not green)with copper metal conductor

Insulated Wire(not green)with Silver metal conductor

Connect,Hot,Black or Red outlet Supply Wire to:

Connect,Neutral,White Outlet Supply Wire to:

Black

White

3 / 3