Instructions / Assembly

Item# CNS5706

Product Dimensions:35.5''W x 13''D x 29.5''H

PIECE QUANTITY

A 1X

B 4X

C 1X ATTACH YOUR RECEIPT HERE

D 4X

Purchase Date

* Please make sure that you have all parts indicated before you begin assembly of this

item

* This item should be assembled on a soft surface to prevent scratching the finish during

assembly

* This item may require periodic tightening

Serial Number

Table Top

Leg

Bottom Board

Foot

CARE AND MAINTENANCE

Always use felt pads under all articles to prevent discoloration or softening of the lacquer.

Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and

avoid common hazards such as hot dishes,harsh solvents and abrasives. Cleaning should

be done with a soft lint free cotton cloth dampened with water or furniture polish. On highly

used surfaces we recommend applying a quality paste wax which should be used on a

regular basis to provide additional protection from sratches and spills. How often you apply

the wax depends on how much wear the furniture receives.

NOTICE

Part List

DESCRIPTION PICTURE

PAGE 1
CARE AND MAINTENANCE Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as hot dishes,harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 5 minutes. 1 2 3 D B C A Step 1 Step 2 Step 3 Take all packaging off the console table.Screw four legs to the table top and gently tighten the legs. Put the bottom board over the end of four legs, Screw four feet thourgh bottom board to connect with legs.