CARE AND MAINTENANCE Spot clean using a mild water-free solvent. Only a professional cleanse should undertake a complete overall cleaning. The use of steam or water-based cleaners may cause excessive shrinking or staining. NOTICE * Please make sure that you have all parts indicated before you begin assembly of this item. * This tier should be assembled on a soft surface to prevent scratching the finish during assembly. * This item may require periodic tightening.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents fist. if any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 60 minutes. Tools Required for Assembly : Phillips Screwdriver STEP 1 UNINSTALL WOOD SCREWS AT TOP ASSEMBLY AND REMOVE APRON FROM TOP ASSEMBLY. STEP 2 ATTACH LEGS TO TOP ASSEMBLY USING NUTS. DO NOT TIGHTEN NUTS AT THIS TIME. OT.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents fist. if any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 60 minutes. Tools Required for Assembly : Phillips Screwdriver STEP 3 INSERT APRON TO TOP ASSEMBLY. ATTACH LEGS TO APRON USING THREADED RODS, SPRING WASHERS, FLAT WASHERS AND NUTS. TIGHTEN NUTS USING WRENCH. STEP 4 TIGHTEN ALL NUT OT.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents fist. if any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 60 minutes. Tools Required for Assembly : Phillips Screwdriver STEP 8 TURN TABLE OVER ITS' UPRIGHT POSITION. ADJUST THE ADJUSTER BOLT THAT HAS STEP 5 REINSTALL WOOD SCREWS IN STEP 1. ALREADY INSTALLED TO STABILIZE YOUR UNIT. OT.