Use and Care Manual

ManualsBrandsSafavieh ManualsFloor LampsJonas 55.5-in Brass Gold Arc Floor Lamp

LIGHTING CARE

As a general rule, do not use harsh abrasives, polishes or chemicals on any lighting ﬁ xtures or shades. They can damage the ﬁ nish.

OUTDOOR LIGHTING | MIRRORS

FABRIC SHADES

Dust regularly with a feather duster or a soft dry cloth.

To remove dirt and grime use a lint brush or ﬁ ne bristle brush and rub gently.

Remove stains and accumulated dust using a soft white cloth or sponge and a solution of mild detergent and warm water. Gently wash away the dirt or stain and then

rinse with a clean cloth and fresh water. Allow the shade to dry in the sun or with the use of a hair dryer.

METAL BASES

Dust regularly with a feather duster or a soft dry cloth.

When more thorough cleaning is necessary, use mild soap and warm water and lightly wipe the surface using a soft white cloth. Rinse using fresh water and a soft white

cloth to remove all soap residue. Dry thoroughly with a soft cloth.

RESIN AND PAINTED BASES

Dust regularly with a feather duster or a soft dry cloth.

Remove accumulated dirt by wiping the entire base with a soft clean cloth and a solution of warm water and mild soap. Rinse with fresh water and a clean cloth and

then dry thoroughly using a soft clean cloth.

BRASS BASES

Brass lighting ﬁ xtures are protected with coat of clear lacquer to keep the ﬁ nish from tarnishing, so brass polish is not necessary. Damage to this protective coating

from harsh cleaning products may lead to a tarnished ﬁ nish.

Dust regularly with a feather duster or a soft dry cloth.

To remove accumulated dirt use mild soap and warm water and lightly wipe the surface using a soft white cloth. Rinse using fresh water and a soft white cloth to re

move all soap residue. Dry thoroughly with a soft cloth.

WOOD BASES

Dust regularly using a soft cloth or furniture duster.

Occasional treatments using lemon oil will prevent the wood from drying while also helping to preserve the luster of the ﬁ nish. Apply a small amount of lemon oil to a

soft clean cloth (do not put the oil directly on the wood base). Gently rub the oil over the entire surface of the wood base. Buff to ﬁ nish with a soft clean cloth.

CERAMIC BASES

Dust regularly using a soft cloth or furniture duster

When necessary, clean the base of your ceramic lamp using a soft clean cloth and a solution of mild soap and warm water. Wipe thoroughly, but gently, then rinse using

a clean cloth and fresh cold water.

LEATHER BASES

Dust regularly using a soft cloth or furniture duster

Avoid placing leather based light ﬁ xtures in direct sunlight

Occasional treatment using leather conditioner will maintain the look and prolong the life of your leather lighting ﬁ xture.

CRYSTAL BASES & ACCENT PIECES

Dust gently on a routine basis using a feather duster.

Wipe the crystal surface and all accent pieces with a clean, soft cloth on a regular basis to maintain the brilliancy of the crystals.

OUTDOOR LIGHTING

Routinely wipe the exterior surface of outdoor lighting ﬁ xtures with a soft clean cloth.

Use glass cleaner to keep the glass clean and clear.

Car wax can be used on the metal surface to preserve and protect the ﬁ nish of your outdoor lighting ﬁ xture. Apply twice a year and follow the directions on the product.

MIRRORS

Dust regularly with a soft clean cloth or furniture duster.

To clean the mirror(s) use a soft cloth and mild solution of distilled white vinegar and warm water.

Do not use window cleaners that contain ammonia to clean mirrored lighting ﬁ xtures.