Instructions / Assembly

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware

contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 15 minutes.

PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT

THERE IS LED 9-WATT BULB IN THE BOX

1 2

Step 1 Step2 Step3

Make sure all parts could be aligned before assemble

Insert the Harp (E) into the Saddle (C). Put the light on a level surface to check

Do not rotate lamp body too hard avoid base screw broken

Put the shade(F) on the Harp(E),then if everything is stable.

Screw the Lamp body (B1) onto the Lamp base (A) tighten the Finial (G)into the Harp (E)

Screw the Lamp body (B2) onto the Lamp body (B1) Insert the bulb(H) into the socket(D).

Screw the Lamp body (B3) onto the Lamp body(B2)

Screw the Lamp body (B4) onto the Lamp body(B3)

Be careful not to twist the power cord and tighten securely

ENJOY YOUR LAMP