Instructions / Assembly

*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left)
Grounding Instructions:
Step 5
Step 6
Consult a qualified electrician to ensure correct branch circuit conductor.
ENJOY YOUR LAMP
a) For installation in the United States: Wrap ground wire from outlet box around green ground screw on
mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied with a ground wire,
connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding
screw on mounting bracket. Tighten ground screw.
Attach the Canopy (G) through Mounting Screw
(C), secure Canopy (G) with Finial (H) to Mounting
Screw (C).
Slide the Tubes (K) over the sockets, Insert the G9
bulbs (L) into the sockets, and then thread the Bulb
Shields (J) to the Fixture Body (N) as shown.
PLEASE USE TYPE G9 LED BULB MAX. 5-
WATT.
THERE ARE 12*2-WATT G9 LED BULBS IN THE
BOX.
3/3