Instructions / Assembly

CARE AND MAINTENANCE

Spot clean using a mild water-free solvent. Only a professional cleaner should undertake

a complete overall cleaning.

The use of steam or water-based cleaners may cause excessive shrinking or staining.

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this

item

* This item should be assembled on a soft surface to prevent scratching the finish during

assembly

* This item may require periodic tightening

Model# FOX2010

Part List and Hardware List

Product

Dimensions:17''WX17''DX30-3/4''H

PIECE DESCRIPTION QUANTITY

PICTURE

Seat

Back

Allen key

Allen bolt

Flat washer



M6*20mm

PAGE 1
CARE AND MAINTENANCE Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a complete overall cleaning. The use of steam or water-based cleaners may cause excessive shrinking or staining.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product Estimated Assembly Time: 10 minutes. Tools Required for Assembly (included): Allen Key 1 (H3) (H2) (H1) Step 1 Turn the chair frame upsidedown. Use Allen wrench H3 to tighten flat washer H1 into bolt H2 to the seat A.