Instructions / Assembly

Model# FOX3006

Product Dimensions:17.52“W*16.93“D*29.13“-38.98“H

PIECE

LENGTH

QUANTITY

A 1X

B 1X

C 1X

D 1X

H1 M10*30mm 3X

H2 M6*35mm 2X

H2.1 M6*15mm 2X

H3 1X

H4 1X

Column

Allen key S

Allen key L

Part List and Hardware List

DESCRIPTION PICTURE

Allen bolt M (For column,Front)

Allen bolt L (For base)

Gaslift

CARE AND MAINTENANCE

Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner.

Test the cleaning method on a hidden area before using them over the entire area .

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this

item

* This item should be assembled on a soft surface to prevent scratching the finish

during assembly

* This item may require periodic tightening

Allen bolt S (For column,Back)

SEAT

Base

PAGE 1
CARE AND MAINTENANCE Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner. Test the cleaning method on a hidden area before using them over the entire area . NOTICE * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * This item may require periodic tightening Model# FOX3006 Part List and Hardware List Product Dimensions:17.52“W*16.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. Tools Required for Assembly (included): Allen Key 1 32 Step 1 Align the gas lift (C) onto the base as pictured. Use allen key “H3” to lock the 3 screws “H1”.