Installation Guide

Step 1 Step 2 Step 3
Insert cross bar B,L(2) into back leg(1)
insert cross bar A,R(3) into back leg(1)
attach front leg(4) to cross bars(3)
Step 4 Step 5 Step 6
drive the 8 bigger screws into front and back legs put the seat(5) on chair check the assembled chair
and put the 8 screw covers on the screws drive the 5 small screws into seat
use a rubber hammer to punch,make sure cross bars are fully
inserted inside
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly: Allen Key, slotted screwdriver