Instructions / Assembly

Step 1 Step 2 Step 3
Step 4
The chair is ok now.
ATTENTION: MAKE SURE ALL SCREWS ARE
FULLY TIGHTENED BEFORE USING CHAIR
Attach Control Mechanism (2) to Seat Assembly (1) with the
arrow towards the front of the chair, using four Washers (8) and
four Screws(7).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH
Now insert the small end of Cylinder Column (3)
into Control Mechanism (2) and carefully press
downward with moderate force until it is fully
seated.
Insert five Casters (6) into Star Base (5), push hard
until you feel or hear the Caster(6) snap into place.
Insert the LARGE end of Cylinder Column (3) with
the bellow(4) into the Star Base (5) and carefully
press downward with moderate force until it is fully
seated.
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Wrench
PREPARATION