Manualshelf

Instructions / Assembly

ManualsBrandsSafavieh ManualsLightingDebonair Drum 3-Light Chrome Pendant
12
1. Fix the mounting bracket (B) to the outlet box with machine screw (C).
2. Make wire connections, with wire connectors (D), following the reference chart listed below.
*Note: When parallel wire (SPT I & SPT II) is used. The neutral wire is square shaped
and ridged and the hot wire will be round in shape and smooth. (See Illustration on left.)
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green
ground screw (F) on mounting bracket, no less than 2" from wire end. Tighten ground screw. If
fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
around green grounding screw on mounting bracket. Tighten ground screw.
3. Orient the ceiling canopy (G) so that the mounting screws (A) protruding from the mounting bracket
go into the holes in the canopy, then secure it with the provided screwed balls (E).
4. Connect the tubes (H) together to get desired length and fix the bottom end to the ring nut (I), the
top end to the canopy.
5. Put on shade (K) and secure it in place using the thumb screw (J).
6. Install bulbs (R). Be sure to use light bulb (R) with wattage no greater than specified on this
fixture. Always make sure that electrical current is turned off before changing bulbs.
7. Fix the threaded rod (L) to the middle of the shade then put a washer (M) onto it before you assemble
the glass diffuser (N). Fix the glass with decorative disc (O) and nut (P) and finial (Q).
Insulated Wire (not green) with Silver metal conductor.
ENJOY YOUR LAMP
White
* Parallel Cord (square & ridged)
Clear, Brown, Gold or Black with Tracer (colored stripes)
Connect, Neutral, White Outlet Supply Wire to:
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.