Installation Guide

Step 1 Step 2

Step 3 Step 4

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware

contents list.

If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 10 minutes.

The hardware needed to connect the legs (B) to the headboard (A)

are 4 big cross bolts (H3) and 4 washers (H2).

Attach the two legs (B) to the headboard (A) using 4 big cross

bolts (H3) and 4 washers (H2).

The vertical slots at the lower part of the leg must be facing the

outside of the bed.

Attach the legs of the headboard (B) to the bed frame by fixing

them together through the 2 holes in the bed frame and the

vertical slot in the leg using 4 small bolts (H4), 8 washers (H2)

and 4 nuts (H1)

The hardware needed to connect the headboard to the bed frame

are 4 small bolts (H4), 8 washers (H2), and 4 nuts (H1)